McNett Seam Grip Instant Repair Kit

Description

With the ultralight Seam Grip® Instant Repair Kit you can repair sleeping pads, fix inflatable mattresses and patch up just about anything else. Use Seam Grip and Tenacious Tape to make fast, jaw-dropping repairs to pads, boots, tents, tarps, packs, rainwear and more. Works on fabrics , leather and many other materials.

The Seam Grip Instant Repair Kit is part of a comprehensive line of Care and Repair products from McNett®. With McNett®, anyone can be a master of equipment repair.

Kit includes: 1 Seam Grip Urethane Adhesive, 3 Tenacious Tape Adhesive Patches, 1 Application Brush

Ultralight and compact

Permanently and quickly fixes leaks, cuts and tears

For use on sleeping pads, boots, tents, rainwear, packs, gaiters, gloves, bivy sacks and more

This kit provides permanent, instant field repairs to Therm-A-Rest® Mattresses, sleeping pads, boots and shoes, outerwear, tents, packs and more. Kit includes 7g. Seam Grip adhesive and sealant, 3 removable Clean Tape Patches and an application brush.

Repair Almost AnythingInstantly!

Detailed Repair Instructions

Clean and dry area to be repaired. Oils, waxes on boots, sunblock and other residue may affect adhesion. Remove oils and waxes on boots with isopropyl alcohol before repairing. For Best Results: For professional looking repairs use Seam Grip alone or Seam Grip with Cotol-240 plus Cure Accelerator . Repairs using a few drops of water to speed cure time are less aesthetic.

To repair holes in self-inflating mattresses

Apply Seam Grip to cover hole and spread 6 mm beyond . Allow to level 8 hours.

To use pad sooner: Technique for small repairs only. Mix a few drops of water into Seam Grip® before applying to hole. Apply mixture and allow to cure level for 30 minutes . Then center patch and apply over Seam Grip .

To Seal Leaking Tent Seams

Seal seam inside tent. Apply Seam Grip to seam. Brush under fabric folds and into stitching. Allow Seam Grip to cure 8 to 12 hours before packing tent.

If tent must be used or packed sooner: Dry area, apply patches alone. Patches may be cut into several pieces for maximum coverage.

To re-attach boot and shoe soles

Clean bonding surfaces with isopropyl alcohol. At minimum: clean with brush and water and remove all dirt.

Apply generous amount of Seam Grip to interior surfaces and spread with brush .

Compress sole to upper. Remove excess with stick.

Use filled water bottle, rocks, etc. to hold sole in place 8 to 12 hours.

To use boot sooner: Mix a few drops of water into Seam Grip before pressing sole to upper. Boot will be ready to use in approximately 3 hours.

To Re-attach Rands on Rods

Use solvent such as isopropyl alcohol to remove waterproofing waxes on bonding surfaces. Buff area with brush or stick to expose untreated leather. Apply Seam Grip, cover with an adhesive patch and use a strap and a stick to press rand closed against boot . Allow to cure overnight, remove patch.

To Seal or Repair Seams in Boots and Shoes: Clean bonding surfaces with isopropyl alcohol or similar solvent to remove waterproofing waxes.

Apply thin coating of Seam Grip using brush.

To Repair pin holes and tears in tents, packs and clothing

Apply patch on outside of item to create removable backing.

Apply Seam Grip to other side and allow to cure level 8 to 12 hours. To use item immediately, Dry damaged area, apply patches alone.

To repair large holes in packs

Apply peel and stick patch to interior surface to create backing. Apply Seam Grip to exterior surface of hole and 6mm beyond onto undamaged surface.

Allow to cure level for 8 to 12 hours. Remove patch.

To reinforce damaged pack straps and gaiter underfoot straps

Apply peel and stick patch to create backing.

Apply Seam Grip to damaged area and 6mm beyond. Allow to cure level for 45 minutes. Remove patch. Cure overnight.