Description
The Fiberglass Surface Tissue 30gr is a fabric of very low weight and almost zero thickness. It is used as a final layer for an even smoother finish of the surface after lamination.
Fiberglass Surface Tissue 30gr is a very fine matting that resembles Tissue Paper. It can be used alone in applications where only an ultra thin reinforcing fabric is required.
The Fiberglass Surface Tissue 30gr can also be used to leave a smoother more attractive surface finish on hand-layup composite parts by using it as the final layer on the reinforcement.
This super-fine Fiberglass Surface Tissue can be also used as the first layer of reinforcement onto a gel coat as a ‘print blocker’ to prevent print-through of the heavier chopped strand mat reinforcement.
Concerning mold constructions its applied immediately after Gel Coat and before the first Mat layer.
Ideal for using it as a finishing layer to give smooth appearance.
Perfectly compatible with all resins .
Sold per meter.
|
Weight per m2 |
30 gr |
|
Thickness |
0.05 mm |
|
Resin consumption 1m2 |
250 – 300 gr/m2 |
|
Width |
1.0 m |
Reviews
There are no reviews yet.