Teak Wonder Cleaner

Description

Teak cleaning is normally a problem that is often solved by drastic methods, such as sanding, or the use of powder, or extremely caustic detergents which will eventually severely damage the surface.

Teak Wonder® Cleaner is a powerful cleanser that thoroughly cleans the teak easily and with very little effort, without the need for sanding. The product is neither caustic, nor aggressive and will not damage rubber seals, paint, or hardware. The grey oxidisation and dirt are removed in a few minutes.

The cleaning process is carried out by wetting the surface to be cleaned thoroughly with fresh water, then apply the cleaner evenly and brush the deck with a soft bristle brush, across the grain . Rinse the soapy solution off, with plenty of fresh water and do not allow the wood to dry prior to starting the brightening process.

On heavily soiled surfaces, which have significant oxidisation, or have not been cleaned for a long time, a second cleaning may be necessary before starting the brightening process.

Carefully wash away any product left on non teak surfaces.

The coverage is approximately 6-8 m2/Ltr .

Instructions

Soak teak with fresh water.

Thereafter apply Teak Wonder® Cleaner directly on the surface evenly and generously.

Brush the teak with a soft scrub brush in the direction of the wood grains. Do not allow it to dry. Add small amounts of water if necessary. Brush until clean, rinse thoroughly.

If a lighter, brighter color of teak wood is preferred, apply Teak Wonder® Brightener as directed, while teak is still wet or after having wet it again.

Teak Wonder® Cleaner does not harm most marine paints, varnishes, fiberglass or aluminum alloys. Due to varied formulas of paints, varnishes, etc., we recommend avoiding contact with these surfaces to prevent possible damage.

Do not mix Teak Wonder® Cleaner & Brightener.